7mm 144 LED/m Mini Skinny SK6812 3535 Digital RGB LED Strip, 1m, 5V

Special Price $34.50 was $45.00
In stock
SKU
BLB10353

Skinny' version of our classic 144/m SK6812 RGB strip, 144 LEDs per meter SK6812 MINI (3.5mm x 3.5mm) RGB LEDs. 7mm wide PCB. Each LED can be controlled by shift-registers.

LED: SK6812 MINI (3.5mm x 3.5mm) RGB LEDs  (Check its datasheet)
Working voltage: 5V DC
Max. working current: 60mA per LED
Working temperature: -40 ℃ ~ 60 ℃
LED number: 144 LEDs / meter
Optional Waterproof: Non-waterproof with 3M tape on the back, IP67 water resistant silicone sleeve
FPC background color: white
FPC Width: 7mm
Length: 1 Meter
Viewing angle: ≥140
Lifespan: MTBF≥50000h

There are 144 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

The protocol used is very very timing-specific and can only be controlled by microcontrollers such as Arduino Uno/Mega microcontroller at 8MHz and 16MHz, Raspberry Pi, or Beagle Bone Black, but also note that it will not work with the Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account