HL1606 LED Controller with RF Remote for HL1606 Digital RGB LED Strip
Work temperature: -20-60℃
Supply voltage: DC12V
Size:94*58*26mm
Gross weight:240g
Power rating:2.2W
Output: two groups SPI signal
Function: it has 84 grayscale,Length setup funtion and Power-fail memory function, you could choose it freely in a lot of programs.
Check the detailed HL1606 RF Controller Operation Instruction
Function of controller panels
ON/OFF button: it can open or close led anytime, when led is on the station of closing, The digital tube will display “P *** ”,“ *** ”is the value of current setting.
Play/pause button: pressing this button to pause, you can see the static affection of led.
Adding button: to add the IC NUMBER, the most number is 500 (1500 group of RGB)
Reducing button: to reduce the IC NUMBER, the least number is 3 (9 group of RGB)Program choosing button, up direction , there are 94 programs in all.Program choosing button: down direction.Speed slow button, there are 99 step in all, the most number is 99.Speed quick button, the least number is 1.
Function of remote panels
ON/OFF: ON/OFF button: it can open or close led anytime.MODE: Play/pause button, pressing this button to pause, you can see the static affection of led.
S+: Speed quick button, the least number is 1
S-: Speed slow button, there are 100 step in all, the most number is 100
B+: Program choosing button, up direction , there are 94 programs in all.
B-: Program choosing button, down direction.