T-1000S SD Card Digital RGB LED Strip Controller
- Buy 5 for $54.00 each and save 8%
- Buy 10 for $49.00 each and save 17%
- Buy 15 for $44.90 each and save 24%
256 Gray,Gamma correction processing software.
Support the rules and special-shaped handle.
Controller, a port output, may bring 1024/2048 light.
Off-line control, play back content stored in the SD card
T-1000C store a maximum of 16 documents
Note: The model T-1000S with one port output, When it control 512 pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically.
T1000-S RGB Pixel controller is an advanced controller that enables you to create stunning LED light displays, shop signs, LED matrixes and screens and many more applications. It supports advanced pixel layouts all configurable from the software provided (LedEdit 2013). Each controller supports up to a maximum of 2048 pixels. More than one controller can be chained together to enable larger displays. All programs are stored on the SD card provided (16 programs MAX) and can be cycled through with a push of a button on the controller. The speed of each program can also be adjusted with buttons on the controller.
T-1000S has a built in support for single line and dual line LED ICs, If controlling up to 512 pixels speeds can reach 30fps. If more than 512 pixels are attached fps will decrease automatically.
This controller supports many popular LED chips such as;
LPD6803, D705, 1101, 6909, 6912, LPD8806, LPD8809, TM1803, TM1804, TM1809, TM1812, M1903, TM1904, TM1909, TM1912, UCS6909, UCS6912, UCS7009, UCS5903, UCS1903, UCS1909, UCS1912, CS3903, WS2801, WS2803, WS2811, DS189, TLS3001, DMX512(170/512pixels), TLS3002, TLS3008, P9813, SM16715, SM16716, BS0901, BS0902, BS0815