Flexible WS2812B 5050 Digital RGB LED Matrix, 4x12 / 8x8 / 8x32 / 16x16 Available

A digital LED matrix of which the color and brightness of each LED can be controlled separately. A lot of LEDs can be placed in sequence and all can be controlled with 1 pin of a microcontroller. Various platforms provide support for this LED by means of libraries, including Arduino and Raspberry Pi.

The LEDs are soldered on a flexible PCB in a zig-zag pattern. Connection wires are soldered to the PCB.

These awesome addressable RGB matrix panels can be daisy-chained to make bigger signs or panels! You can create animations, games, or even incorporate them into a fun e-textiles project. On top of all that, thanks to its flexible backing, this LED Matrix can be bent and bowed to fit onto almost any curvy surface. Attached to each flexible LED matrix are two 3-pin JST SM connectors and two sets of bare power cables (input / output), which provide you connections for VCC, DATA, and GND.

Emitting color: pixel RGB , IC WS2812B
Work Voltage: DC5V
Maximum current: Per LED: 36mA ± 10%
Waterproof level: Non-waterproof
Connection: VCC: RED; GND:BLACK/WHITE; DAT:BLUE