WS2818 Addressable RGB LED Strip, 12V Dual Signal Transmission, 5m
External WS818 IC control.
Dual signal wires for more reliability (a single LED failure has no effect on other LEDs working on the same unit and the whole light can stay illuminated);
50mm intervals cutting point
Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
Buying in Bulk: We offer competitive prices and volume discounts for customers needing to order large quantities. If you are interested in ordering items in bulk, please get in contact with us.
- Buy 5 for $75.50 each and save 5%
- Buy 10 for $69.50 each and save 13%
- Buy 30 for $65.50 each and save 18%
Driving IC: WS2818 (Datasheet)
Working voltage: 12V DC
Power consumption: 14.4W per meter
Working temperature: -40 ℃ ~ 60 ℃
LED number: 60 LEDs / meter
Color: RGB
Finish: white
Waterproof: Nonwaterproof with 3M tape on the back, IP67 water resistant silicone sleeve
FPC Width: 10mm
Reel Length: 5 meters
Viewing angle: ≥120
Lifespan: MTBF≥50000h
The strip is powered by a 12V power supply and is controlled by a single data line from a suitable controller, for example Teensy 3, Arduino, Raspberry Pi, BeagleBone Black or similar microcontroller/computer. The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry. Strip can be cut between every LED to create custom lengths. Do not bend strip sharply. Longer runs should be powered from both ends to reduce voltage drop.
Product Model | ||||||||
M/N | Voltage | LED Type | IC Driver | ICs (pixels)/m | LEDs/m | Cut Points | Dimensions | IP Rate |
WS2818-60-IP20 WS2818-60-IP67 |
DC12V | 5050 RGB SMD | WS2818 | 20 | 60 | Every 50.0mm | 1000*10*3.0mm 1000*12*4.0mm |
IP20 |