DIY Spring Splice Terminal Blocks, Pack of 10
Each wire connector is provided with 4 slots and 4 clasps on two sides, which can be flexibly assembled or disassembled into 2 , 3, 4, 6 bit (way) butt connectors as needed. Don't worry about buying mismatched terminal connectors.
Quick Splice Wire Connectors
- Buy 10 for $3.55 each and save 10%
- Buy 30 for $2.95 each and save 25%
- Buy 50 for $2.75 each and save 30%
Wire Cross section: 0.08~4.0mm²(solid), 0.08~4mm²(stranded)
wire size : 28-12 AWG
Rated Voltage: 250V/600V
Rated Current: 32A
Shell Material: flame-retardant nylon PA66
Guide Strip: Electrolytic copper (Surface tin plating)
Spring: Nickel chromium alloy steel
These Butt Terminal Wire Connectors that can be flexibly assembled into 2/3/4/6 bit or any junction as needed.
How to use the wire nuts:
1.Push the orange levers to 90°.
2.Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end.
3. put the levers back.
-
DC Barrel Adapter, 2.1x5.5mm Male/Female to Spring Wire TerminalsSpecial Price $1.29 Regular Price $1.50 -
DC Barrel Adapter, 2.1x5.5mm Male/Female to Screw Terminal BlockSpecial Price $0.95 Regular Price $1.80 -
Quick Spring Splice Terminal Blocks, 2/3 in 2/3/4/6 out Available, Pack of 10Special Price $5.95 Regular Price $7.50 -
Quick Spring Splice Terminal Blocks, 2/3/4/5-Wire Available, Pack of 10Special Price $2.45 Regular Price $3.25 -
Dual Wire Snap Plug In Quick Splice Wire Terminal Connectors, Pack 0f 10Special Price $6.45 Regular Price $7.50 -
Solderless Quick Splice Wiring Connectors, I/T type, Single/Dual Channel Available, Pack of 10Special Price $6.45 Regular Price $7.50

