Quick Spring Splice Terminal Blocks, 2/3 in 2/3/4/6 out Available, Pack of 10
SKU
BLB10190
In stock
Ease of use – pull the lever up, insert a conductor and push the lever back down
Connect solid, stranded and fine-stranded conductors
Time savings for installers and device manufacturers
Quickly install devices with higher levels of power consumption
Safely install long cable runs with larger conductor cross sections
Mounting carrier for installation conforms to standards
Special Price $5.95 Regular Price $7.50
- Buy 5 for $5.45 each and save 8%
- Buy 30 for $4.95 each and save 17%
- Buy 50 for $4.45 each and save 25%
Rated Voltage: 250V/600V
Rated Current: 32A
Shell Material: flame-retardant nylon PA66
Guide Strip: Electrolytic copper (Surface tin plating)
Spring: Nickel chromium alloy steel
How to use the wire nuts:
1.Push the orange levers to 90°.
2.Strip off the housing of wires to 0.35-0.40inch and make sure that wires are plugged into the end.
3. put the levers back.
Wire Cross Section:
| 3 Port | AWG 28-14(0.08~2.5mm2) |
| 2 in 2 out | AWG 28-12 (0,08 ~4 mm2) |
| 3 in 3 out | AWG 28-12 (0,08 ~4 mm2) |
|
2 in 2 out / 2 in 6 out / 3 in 6 out
|
Solid Wires(BV): 0.08~4mm² (28-12AWG) |
| Stranded Wires(BVR): 0.08~2.5mm² (28-14AWG) | |
| Flexible Wires(RV): 0.08~2.5mm² (28-14AWG) |
We found other products you might like!
-
3/6 Port Push-in Fast Quick Wire Splitter, 1 Input to 3/6 OutputsSpecial Price $2.95 Regular Price $3.50 -
DIY Spring Splice Terminal Blocks, Pack of 10Special Price $3.95 Regular Price $4.50 -
Dual Wire Snap Plug In Quick Splice Wire Terminal Connectors, Pack 0f 10Special Price $6.45 Regular Price $7.50 -
Solderless Quick Splice Wiring Connectors, I/T type, Single/Dual Channel Available, Pack of 10Special Price $6.45 Regular Price $7.50 -
2/3/4/5/6 Conductor 22/20/18AWG Extension Power WiresSpecial Price $4.95 Regular Price $7.50 -
Quick Spring Splice Terminal Blocks, 2/3/4/5-Wire Available, Pack of 10Special Price $2.45 Regular Price $3.25