24-Key Infrared RGB LED Controller, 2 Amps/Channel
2A/Ch 24W (can control 32' of our 12V RGB flex strip).
Power input: 12V DC (Male Barrel plug 5.5mm x 2.1 ~ our power supplies plug right into this controller).
Can be used with amplifiers to control more than 2x rolls (5M) of RGB flexible LED strip.
- Buy 5 for $9.50 each and save 4%
- Buy 10 for $9.00 each and save 9%
- Buy 15 for $8.20 each and save 17%
Operating Temperature: -20°C +60°C
Supply Voltage: DC 12V - 24V
Output: 3 channels
Connection Mode: Common Anode (Cathode Optional)
Static Power Consumption: <1W
Output Current: 2A x 3Ch =6A 2A per channel
Output Power: 12V: <72W, 24V: <144W
Controller Dimensions: L 61 x W 35 x H 22mm
Package Size: L 106 x W 64 x H 56mm
Net Weight: 60g
Gross Weight: 65g
This IR (Infra-Red) controller and remote is designed for controlling LED lighting products such as flexible strips, glass curtains, wall lights and wall washers and provides an easy to use solution for switching lights on or off and choosing lighting colours.
The unit is easy to install and comes in two parts: a receiver, which installs between the strip light and driver/transformer, and a remote controller which can be used to set the colour, brightness and speed of the LED Strip.
Using the IR controller/remote, you can wirelessly control the settings on your LED lights, choosing from one of 16 static colours and 4 dynamic modes.
As this is an Infra-Red controller, you will need a direct line of sight between the remote and Infra-Red sensor. If this will cause a problem you may want to consider one of Heralds range of RF wireless controllers. The sensor is attached to a length of wire for optimum placement.
Check the detailed manual of this 24-Key Infrared RGB LED Controller
