LED Strip RGB 5050, 60 LEDs/m, 5m, 12V/24V DC

Operating Voltage: available in 12V and 24V
Power Consumption: 14.4W/m
LED Density: 18 LEDs/ft (60/M)
LED Chip: Epistar 5050 SMD
Colors: RGB multicolor
Strip Width: 10mm (0.39")
Cut Increments: Every 3 LEDs (12V) or 6 LEDs (24V)
Finish(PCB): available in white or black
Roll Length: 5meter (16' 5")
IP Rating: IP20 (Rated for Indoor Use Only), IP67 (silicone sleeve, protected against moisture)
Power Feed: 6" 18-4 Wire w/ Tin Coated Ends
Dimming and Control: Dim and Control through an LED Controller
Lifetime: 50,000 Hours (Average)

This RGB LED Strip comes in a 16’5” roll/reel and is 0.39” (10mm) wide. 5050 LED chips are mounted on a flexible PCB. The full LED strip spool has 300 LEDs packed in a density—18 LED/ft (60/M)—configuration. The LED strip comes with (1) 6” 18-4 wire lead with bare, tin-coated ends, for fast and reliable wire-to-wire connections.

This LED Strip can produce millions of different colors by mixing red, green, and blue lighting through a controller. It works on 12/24 Volts, so to connect it to a power outlet you will also need a 12/24V power supply.